A H Supply - Easy Ordering

Part 66415 - 15W LED Lamp
As shown at AGA Convention. 2G11 Base. About 17" long. Samsung LEDs 6400K. Same format as Compact Fluorescents. No external driver required - connect your socket or endcap directly to power cord. Convert existing 2G11 Compact fixtures to LEDs by removing the ballast. Wiring instructions included.
Price: $71.99
Enter quantity
to cart

Part 66420 - 20W LED Lamp
As shown at AGA Convention. 2G11 Base. About 22" long. Samsung LEDs 6400K. Same format as Compact Fluorescents. No external driver required - connect your socket or endcap directly to power cord. Convert existing 2G11 Compact fixtures to LEDs by removing the ballast. Wiring instructions included.
Price: $83.99
Enter quantity
to cart

Part 66426 - 26W LED Lamp
As shown at AGA Convention. 2G11 Base. About 22" long. Samsung LEDs 6400K. Same format as Compact Fluorescents. No external driver required - connect your socket or endcap directly to power cord. Convert existing 2G11 Compact fixtures to LEDs by removing the ballast. Wiring instructions included.
Price: $98.99
Enter quantity
to cart

Part 60026 - LED Clips Package
The LED Clips Package includes two stainless spring-steel clips that will hold one LED Lamp in place with the aluminum back of the lamp ľ” away from the mounting points. It also includes two ˝” stainless steel screws and two nylon nuts. If you are mounting the clips to a wood surface or to a plastic or metal enclosure with nubs that are designed for #6 (3/32” diameter) screws, you can screw them into place with the screws provided. Or you can route the ˝” screws through holes in the top of your metal or plastic enclosure, through the holes in the clips, and then screw the nylon nuts onto the ends of the screws.
Price: $4.89
Enter quantity
to cart

Part 60418 - LED Socket with 18 inch Wires
If your LED Lamp is installed where moisture resistance is not a concern (like over a glass top on your tank), this white socket will work well. It simply snaps onto the base of the lamp with stainless spring-steel connectors that hold it in place and does not need to be mounted to anything. It comes with two 18” long wires to route to your power cord, four self-adhesive wire guides to help you keep your installation neat, and three wirenuts to make your electrical connections. (The third wirenut is for wiring in a switch.)
Price: $4.89
Enter quantity
to cart

Part 60436 - LED Socket with 36 inch Wires
If your LED Lamp is installed where moisture resistance is not a concern (like over a glass top on your tank), this white socket will work well. It simply snaps onto the base of the lamp with stainless spring-steel connectors that hold it in place and does not need to be mounted to anything. It comes with two 36” long wires to route to your power cord, four self-adhesive wire guides to help you keep your installation neat, and three wirenuts to make your electrical connections. (The third wirenut is for wiring in a switch.)
Price: $5.49
Enter quantity
to cart

Part 60024 - Moisture-Resistant Endcap with 6ft. Cord
This Moisture-Resistant Endcap is the best connection option where high humidity and condensation are a concern. It comes with three cable clamps with screws for routing the six foot cord neatly around large enclosures or canopies, and it comes with a snap bushing for routing the cord neatly through a 3/8” diameter hole, and three wirenuts for connection to your power cord and (optionally) switch.
Price: $11.99
Enter quantity
to cart

Part 60017 - Endcap Cord Plug
For smaller setups where your timer outlet is nearby, you can opt to install this 2-prong, non-grounding plug on the end of your endcap cord, plug the endcap directly into your timer, and eliminate a separate power cord. Uses Leviton’s Clamptite design with hinged front for quick installation.
Price: $4.29
Enter quantity
to cart

Part 60033 - Bolt/Locking Nut Package
This package contains three #6 x ˝” stainless steel bolts and three matching stainless steel nuts. For metal or plastic enclosures, you can use these in place of the screws that come with the cable clamps which are included with the Moisture Resistant Endcap. The nuts have a nylon locking insert so a separate lock washer is not required.
Price: $0.89
Enter quantity
to cart

Part 60016 - Power Cord with In-Line Switch
This two wire cord has a two prong plug and an in-line rotary switch. Comes with two strain relief bushings for installation through either a 3/8” or 1/2" diameter hole.
Price: $6.99
Enter quantity
to cart

Part 60012 - Push Button Switch
This single-pole switch with screw-on retaining ring can be installed through a 3/8” diameter hole in material up to 3/16” thick.
Price: $3.99
Enter quantity
to cart